2 Causes And Remedies For Uneven Heating Issues In A House
If some of the rooms in your house are really hot in the winter and others are really cold, your house is suffering from an uneven heating issue. This issue is quite common, but it should not be something that you consider normal. It can be resolved, but it will take diagnosing the cause of the problem. There are several different reasons this might be happening in your house, and a heating repair company is likely to check the following two things.
Ductwork
Resolving the issue of uneven heating will require some troubleshooting. The furnace repair company is likely to begin by inspecting the furnace and changing the furnace filter. These steps will often help with the issue a little bit, but they will usually not solve the entire problem. It's still important, though, for these things to be inspected.
A heating repair company is likely to inspect the ductwork of the system next. The ductwork is found in walls and ceilings and can be hard to access, but it is an integral part of a forced air heating system. The ducts are used to transfer air throughout your house, but there are times when they are not operating properly. During this inspection, the heating company will:
- Test for leaks – If the ducts have leaks or have loose connections, heat can get lost as it travels from the furnace to the rooms in your home. They can fix this problem by sealing the leaks in the system.
- Clogs – While it is unlikely that your ducts are completely clogged, they may contain some debris. This could be preventing all of the heated air from reaching its destinations.
- Vents – They will also inspect all the vents during this process to ensure that they are not clogged or blocked.
In addition to inspecting the ductwork in your home, an HVAC company will also inspect the return air vent system. Return air vents are also a vital part of the operations of a furnace. If they are not working properly, or if there is not a sufficient number of vents in your house, this might be the cause of your uneven heating issues.
System Design
If the furnace appears to be fine and if the ductwork is working properly, the heating company will probably start looking at the design of the system. There is a chance that the system was not designed properly for your house. It could be that the system is too small, which means that it may not be able to keep up with the demands of your house.
It could also be due to an improper design of zones. If your house has only one zone in it, you are more likely to experience uneven heating because it will be harder to control the temperature in your home. To solve this problem, the HVAC company might recommend adding one or two more zones to your system.
By adding an extra zone in your house, you will get an extra thermostat. For example, if you have a two-store house and it has only one zone, the thermostat is likely to be located on the main level. Because heat rises, your upstairs might be really hot, while your main floor might be too cold.
When an extra zone is added, it could be placed upstairs. This would give you a separate thermostat in the upstairs of your home, which would allow you to control the temperatures separately. Adding an extra zone may also help you save energy and money on your heating costs.
To learn more about uneven heating issues, make an appointment today with a company that offers heating repairs, like A Bailey Plumbing.